Fastrak Technical Support
Maintained customers have access to our experienced support team and our Online Product Support pages. For more details on how best to contact the support team visit our Technical Support homepage.
This page outlines the major Fastrak releases and associated downloads. Please select a CD version to display - Current Version: 18
Fastrak |
Release 18.0 |
Jul 2009 |
Version |
Fastrak Building Designer and Fastrak Portal Frame Designer |
|||
Building Designer/Building Designer LE | 10.0.0.20 | ||
Building Wind Load Modeller | 10.0.0.20 | ||
Composite Beam | 10.0.0.16 | ||
General Beam | 10.0.0.2 | ||
General Column | 10.0.0.2 | ||
Simple Beam | 10.0.0.15 | ||
Simple Column | 10.0.0.2 | ||
Fastrak Portal Frame | 10.0.0.20 | ||
Fastrak Portal Frame Wind Load | N/A** | ||
Fastrak Portal Frame Snow Load | N/A** | ||
Connection Design |
|||
Fastrak Connections* | 10.0.0.10 | ||
Fastrak Simple Connections | 10.0.0.10 | ||
Fastrak Moment Connections | 10.0.0.10 | ||
Fastrak Column Base | 10.0.0.10 | ||
Fastrak Column Splice Connection | 10.0.0.10 | ||
Fastrak Hollow Section Connections | 10.0.0.10 | ||
Portal Frame (Old Version) |
|||
Portal Frame | 6.0.0.0 | ||
Wind Load | 6.0.0.0 | ||
Snow Load | 6.0.0.0 | ||
Modeller | 6.0.0.0 | ||
Moment Connections | 6.0.0.0 | ||
Column Base | 6.0.0.0 | ||
Crane Beam | 10.0.0.0 | ||
* Fastrak Connections is a container application to access Fastrak Simple, Fastrak Moment, Fastrak Column Base, Fastrak Column Splice Connections and Fastrak Hollow Section Connections.
** These are now part of the Fastrak Portal Frame application
Downloads
Below are the latest service packs for Fastrak
Software Updates |
Size |
||
CSC Update Service 11 |
|||
There are currently no Software Updates available |
|||
CSC Licensing 3 |
|||
There are currently no Software Updates available |
|||
CSC Common 4 |
|||
There are currently no Software Updates available |
|||
Fastrak18 |
Software Updates |
||
September 9th, 2009 |
Service Pack 1Service Pack 1This Service pack fixes the following issues and also includes several feature enhancements Building DesignerVarious crashes related to portal frame elements. Various issues related to DXF Export. Foundation reactions for Combinations report 0 values, in the graphic, printed report and excel report - when a snow loadcase is included within the design combination. Crash which occurred running the vibration analysis when a Westok beam was included as either the primary or secondary beam. Show Alter\State Design Status view - Composite Beams show green pass status, but examine shows that Dead load deflection check has failed. Other various fixes Portal FrameSCI P292 calculation - A crash which could occur, when a Monopitch Portal Rafter was included in the frame. SCI P292 calculation - A crash which could occur, when the value of lambda crit is very large. The design for some combinations was not being performed, due to an issue with checking the error status returned from the solver - Elastic plastic analysis. Portal Geometry - A tie can now be defined within a monopitch span, in the length of the column. Various issues related to Member Stability. Moment Connection - The software now passes the moment at the sharp end of the haunch to the moment connection software. Composite BeamIncorrect calculation of the reduction factor (k), when the deck is parallel to the beam. Composite Beams with web openings, which are subsequently turned off - are still displaying design results for each opening in the design results viewer. Westok beam - service Stress check when multiple combinations checked, the software is cumulative adding the stress between combinations - giving a very conservative result for all subsequent design combinations. Composite Beams with web openings, a calculation error introduced in to v10.0, the software is incorrectly calculating the number of stud groups over the opening when there is more than 1 stud in the group. This affects the calculation of the effective lever arm and hence this results in a conservative calculation of the Vierendeel moment across the opening. Simple BeamCrash which occurred when a plated beam was defined with web openings. Simple ConnectionsToe plate connections can now be defined and designed. | 22.34 MB |
 |
N/A*: Downloads are cumulative and therfore you only require the latest version.
General |
|
Size |
|
Autodesk Revit Structure |
|||
CSC & Revit Structure Integration |
Fastrak and Revit Structure IntegrationFastrak and Revit Structure IntegrationFree of charge download (requires online registration) to enable Revit Structure to import and export from CSC's Fastrak Building Designer. Minimum Software Requirements: Building Designer version 8.0 |
|
|
